Minimal response time to disconnect / connect loads
Connects to the utility meter’s isolated pulse output. Can also connect to any of our measuring devices when a utility pulse is not available.
Calculates Maximum Demand using either the Rolling, Fixed (Block) demand methods.
Using the PS12 DC auxiliary power supply allows for the connection of mid voltage loads to the unit.
Unit can be tested by a simulated program in order to prevent unwanted operations.
Prioritizes the loads to be disconnected when reaching the maximum demand limit.
Substantial control capabilities housed in stand-alone unit(s) priced for a short-term return on investment.
LOAD CONTROL
Control up to 128 loads or groups of loads using contactors
Prioritizes the loads to be disconnected when reaching the maximum demand limit.
Option to create groups of loads having the same priority of connection and disconnection: FIFO or LIFO.
Status identifi cation of each controlled load, defi ned as: Active, Inactive, Forced active and Forced inactive. For example: By programming the load to “Forced inactive” the load can be repaired without the fear of having the load energized during the repair.
Modular design which can be added to in order to handle the number of loads to be controlled.
Modules can be installed near each load in order to simplify wiring and improve response time.
It has a modular system which allows the load connection/disconnection to be near to the loads themselves, to simplify cabling, to reduce cabling distances and to improve response time
CA-4 / MR-3
Product Information:
Add-ons:
