Split and Solid Core Current Tranformers

Split Core CT

The MLG-TP series of split core current transformers have been designed for easy, no-intrusive installation in existing or new electrical networks around cables or busbar. Their spring loaded, bolted contacts maintain a 0.5% accuracy rating.

FEATURES

• 0.5% Accuracy
• Wide inside window to accomodate bus bar and cables.
• Shunting Screws
• Primary Current Ranges from 100 to 5000A
• Also available with built in 4-20mA output
• Secondary output 5A (1A and mV outputs also available)

RopeCT

For locations where traditional CT's don't fit. Plus the RopeCT provides ability to read higher currents.

FEATURES

• 24 inch coil (other lengths available)
• Rated input from 500A to 5000A (with over-range up to 15kA)
• Output of 0.333 Volt AC at rated current
• Accuracy +-1%
• Accuracy from 10 % to 300% of rated current
• Phase angle < 0.5 degrees measured at 50% rated current
• 4ft. insulated leads
• UL recognized
• Custom output and other parameters are available

Product Information:
Split Core MLG-TP specs (866.72 K)
Split Core MLG-SCT specs (967.25 K)
Split Core MLG-TP-420 specs (958.71 K)
RopeCT MLG-RCT-2400 specs (787.16 K)

 

Solid Core CT

The MLG-TDR 6 Series of solid core current transformers provide a low cost, accurate solution for common energy measurement applications. They are available from 50A to 400A. Please contact us for requirements up to 4000A

FEATURES

• 1% Accuracy
• Wide inside window.
• Primary Current Ranges from 50 to 400A (ranges up to 4000A available)
• Also available with built in 4-20mA output
• Secondary output 5A (1A and mV outputs also available)

Product Information:
Solid Core MLG-TDR 6 specs (860.11 K)
Solid Core MLG-UCT specs (1.08 Mb)
Solid Core MLG-TI-420 specs (843.01 K)
 

Add-ons:
PowerStudio: Energy Management Software