DTS 307 MCM model selection* Choose from a list of most popular DTS 307 MCM model numbers or customize the DTS 307 MCM
Customization of DTS 307 MCM Select this option if the popular DTS 307 MCM models will not be sufficient for your specific application.
Contact Measurlogic to discuss your specific requirements
Number of Current Channels* Choose the number of current channels you need to measure
--- SELECT ONE --- 9 x current channels (3 x 3 phase inputs) 12 x current channels (4 x 3 phase inputs) 18 x current channels (6 x 3 phase inputs) 24 x current channels (8 x 3 phase inputs)
Most popular 9 channel DTS 307 MCM models* These DTS models are the most popular and are typically in stock or 1 week lead-time.
For help with the part number please consult model builder in the PDF datasheet.
Select a DTS model from the list below to see detailed parameters.
--- SELECT ONE --- DTS 307-SB-N-9C (9 channels, RS-485: BACnet/Modbus, self-powered) DTS 307-EM-N-9C (9 channels, Ethernet: Modbus TCP, self-powered) DTS 307-EB-N-9C (9 channels, Ethernet: BACnet/IP, self-powered)
Most popular 12 channel DTS 307 MCM models* These DTS models are the most popular and are typically in stock or 1 week lead-time.
For help with the part number please consult model builder in the PDF datasheet.
Select a DTS model from the list below to see detailed parameters.
--- SELECT ONE --- DTS 307-SB-N-12C (12 channels, RS-485: BACnet/Modbus, self-powered) DTS 307-EM-N-12C (12 channels, Ethernet: Modbus TCP, self-powered) DTS 307-EB-N-12C (12 channels, Ethernet: BACnet/IP, self-powered)
Most popular 18 channel DTS 307 MCM models* These DTS models are the most popular and are typically in stock or 1 week lead-time.
For help with the part number please consult model builder in the PDF datasheet.
Select a DTS model from the list below to see detailed parameters.
--- SELECT ONE --- DTS 307-SB-N-18C (18 channels, RS-485: BACnet/Modbus, self-powered) DTS 307-EM-N-18C (18 channels, Ethernet: Modbus TCP, self-powered) DTS 307-EB-N-18C (18 channels, Ethernet: BACnet/IP, self-powered)
Most popular 24 channel DTS 307 MCM models* These DTS models are the most popular and are typically in stock or 1 week lead-time.
For help with the part number please consult model builder in the PDF datasheet.
Select a DTS model from the list below to see detailed parameters.
--- SELECT ONE --- DTS 307-SB-N-24C (24 channels, RS-485: BACnet/Modbus, self-powered) DTS 307-EM-N-24C (24 channels, Ethernet: Modbus TCP, self-powered) DTS 307-EB-N-24C (24 channels, Ethernet: BACnet/IP, self-powered)
Voltage: 208V-480V 3 phase 4 wire system - NEUTRAL required
Channels: 9 x current channels (3 x 3 phase inputs)
Current: 333mV CTs or Flexible Rogowski CTs
Communication: RS-485: BACnet MS/TP or Modbus RTU
Powering: Self-powered (Va - N)
I/O: 3 x digital output (kWh)
Mounting: DTS MCM meter pre-mounted on DIN rail
Order #: D307-0200 Voltage: 208V-480V 3 phase 4 wire system - NEUTRAL required
Channels: 12 x current channels (4 x 3 phase inputs)
Current: 333mV CTs or Flexible Rogowski CTs
Communication: RS-485: BACnet MS/TP or Modbus RTU
Powering: Self-powered (Va - N)
I/O: 4 x digital output (kWh)
Mounting: DTS MCM meter pre-mounted on DIN rail
Order #: D307-0204 Voltage: 208V-480V 3 phase 4 wire system - NEUTRAL required
Channels: 18 x current channels (6 x 3 phase inputs)
Current: 333mV CTs or Flexible Rogowski CTs
Communication: RS-485: BACnet MS/TP or Modbus RTU
Powering: Self-powered (Va - N)
I/O: 6 x digital output (kWh)
Mounting: DTS MCM meter pre-mounted on DIN rail
Order #: D307-0208 Voltage: 208V-480V 3 phase 4 wire system - NEUTRAL required
Channels: 24 x current channels (8 x 3 phase inputs)
Current: 333mV CTs or Flexible Rogowski CTs
Communication: RS-485: BACnet MS/TP or Modbus RTU
Powering: Self-powered (Va - N)
I/O: 8 x digital output (kWh)
Mounting: DTS MCM meter pre-mounted on DIN rail
Order #: D307-0212 Voltage: 208V-480V 3 phase 4 wire system - NEUTRAL required
Channels: 9 x current channels (3 x 3 phase inputs)
Current: 333mV CTs or Flexible Rogowski CTs
Communication: Ethernet: Modbus TCP
Powering: Self-powered (Va - N)
I/O: 3 x digital output (kWh)
Mounting: DTS MCM meter pre-mounted on DIN rail
Order #: D307-0202 Voltage: 208V-480V 3 phase 4 wire system - NEUTRAL required
Channels: 12 x current channels (4 x 3 phase inputs)
Current: 333mV CTs or Flexible Rogowski CTs
Communication: Ethernet: Modbus TCP
Powering: Self-powered (Va - N)
I/O: 4 x digital output (kWh)
Mounting: DTS MCM meter pre-mounted on DIN rail
Order #: D307-0206 Voltage: 208V-480V 3 phase 4 wire system - NEUTRAL required
Channels: 18 x current channels (6 x 3 phase inputs)
Current: 333mV CTs or Flexible Rogowski CTs
Communication: Ethernet: Modbus TCP
Powering: Self-powered (Va - N)
I/O: 6 x digital output (kWh)
Mounting: DTS MCM meter pre-mounted on DIN rail
Order #: D307-0210 Voltage: 208V-480V 3 phase 4 wire system - NEUTRAL required
Channels: 24 x current channels (8 x 3 phase inputs)
Current: 333mV CTs or Flexible Rogowski CTs
Communication: Ethernet: Modbus TCP
Powering: Self-powered (Va - N)
I/O: 8 x digital output (kWh)
Mounting: DTS MCM meter pre-mounted on DIN rail
Order #: D307-0214 Voltage: 208V-480V 3 phase 4 wire system - NEUTRAL required
Channels: 9 x current channels (3 x 3 phase inputs)
Current: 333mV CTs or Flexible Rogowski CTs
Communication: Ethernet: BACnet/IP
Powering: Self-powered (Va - N)
I/O: 3 x digital output (kWh)
Mounting: DTS MCM meter pre-mounted on DIN rail
Order #: D307-0216 Voltage: 208V-480V 3 phase 4 wire system - NEUTRAL required
Channels: 12 x current channels (4 x 3 phase inputs)
Current: 333mV CTs or Flexible Rogowski CTs
Communication: Ethernet: BACnet/IP
Powering: Self-powered (Va - N)
I/O: 4 x digital output (kWh)
Mounting: DTS MCM meter pre-mounted on DIN rail
Order #: D307-0218 Voltage: 208V-480V 3 phase 4 wire system - NEUTRAL required
Channels: 18 x current channels (6 x 3 phase inputs)
Current: 333mV CTs or Flexible Rogowski CTs
Communication: Ethernet: BACnet/IP
Powering: Self-powered (Va - N)
I/O: 6 x digital output (kWh)
Mounting: DTS MCM meter pre-mounted on DIN rail
Order #: D307-0220 Voltage: 208V-480V 3 phase 4 wire system - NEUTRAL required
Channels: 24 x current channels (8 x 3 phase inputs)
Current: 333mV CTs or Flexible Rogowski CTs
Communication: Ethernet: BACnet/IP
Powering: Self-powered (Va - N)
I/O: 8 x digital output (kWh)
Mounting: DTS MCM meter pre-mounted on DIN rail
Order #: D307-0222 Recommended Accessories / Options 9 or 12 Channel Weatherproof Enclosure Options Select an enclosure to mount your 9 or 12 channel DTS 307 MCM meter
--- SELECT ONE --- No Enclosure 10 x 8 x 4 enclosure (MKTENCL-096) 14 x 12 x 7 enclosure (MKTENCL-092)
Only choose this option if you plan to mount the DTS 307 MCM meter in an existing enclosure Dimensions: 10" x 8" x 4"
No. of Channels: Suitable for up to 12 channels
Weatherproof: Yes with stainless steel lockable latches
Mounting: Wall mounting
Material: Non-metallic
Connections: 3 phase fused voltage inputs,& neutral terminal
Order #: MKTENCL-096 18 or 24 Channel Weatherproof Enclosure Options Select an enclosure to mount your 18 or 24 channel DTS 307 MCM meter
--- SELECT ONE --- No Enclosure 14 x 12 x 7 enclosure (MKTENCL-092)
Dimensions: 14" x 12" x 7"
No. of Channels: Suitable for up to 24 channels
Weatherproof: Yes with stainless steel lockable latches
Mounting: Wall mounting
Material: Non-metallic
Connections: 3 phase fused voltage inputs,& neutral terminal
Order #: MKTENCL-092 SET 1: Current Inputs (333mV or Rogowski CTs) This must match the secondary / output signal from the CT you plan to connect to SET 1 of the DTS 307 MCM meter (Each meter required 1 to 3 CTs depending on the load type being measured - See CT section below)
--- SELECT ONE --- No CT (Set 1) 333mV CT (Set 1) Rogowski Flexible CT (Set 1)
SET 1: Do you want to add more 333mV or Rogowski CT sets Choose YES to add further CTs and NO if this is the last set of CTs for the DTS 307 MCM
--- SELECT ONE --- YES NO
SET 1: Amperage of CT - 333mV output Other CT ratings available on request
--- SELECT ONE --- 25 50 100 200 400 600 800 1000 For Currents > 1000A select Rogowski CTs
SET 1: Aperture of 25A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.45" x 0.47" (Suggested) - MLG-WCT-0470-025:333 0.72" x 0.62" - MLG-WCT-0620-025:333
SET 1: Aperture of 50A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.45" x 0.47" (Suggested) - MLG-WCT-0470-050:333 0.72" x 0.62" - MLG-WCT-0620-050:333
SET 1: Aperture of 100A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.72" x 0.62" (Suggested) - MLG-WCT-0620-100:333 0.75" x 0.93" - MLG-WCT-0960-100:333 1.0" x 1.4" - MLG-WCT-1400-100:333 1.3" x 1.7" - MLG-WCT-1700-100:333
SET 1: Aperture of 200A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.75" x 0.93" (Suggested) - MLG-WCT-0960-200:333 1.0" x 1.4" - MLG-WCT-1400-200:333 1.3" x 1.7" - MLG-WCT-1700-200:333 1.63" x 2.5" - MLG-WCT-2500-200:333
SET 1: Aperture of 400A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
1.3" x 1.7" (Suggested) - MLG-WCT-1700-400:333 1.63" x 2.5" - MLG-WCT-2500-400:333 2.0" x 3.5" - MLG-WCT-3500-400:333
SET 1: Aperture of 600A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
1.63" x 2.5" (Suggested) - MLG-WCT-2500-600:333 2.0" x 3.5" - MLG-WCT-3500-600:333
SET 1: Aperture of 800A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
1.63" x 2.5" (Suggested) - MLG-WCT-2500-800:333 2.0" x 3.5" - MLG-WCT-3500-800:333
SET 1: Aperture of 1000A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
2.0" x 3.5" - MLG-WCT-3500-1000:333
SET 1: Diameter of Flexible Rogowski CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
--- SELECT ONE --- 4" : MLG-WRT-4:140 (up to 2.5kA when used with a DTS sub-meter) 6" : MLG-WRT-6:140 (up to 2.5kA when used with a DTS sub-meter) 8" : MLG-WRT-8:070 (up to 5kA when used with a DTS sub-meter) 12" : MLG-WRT-12:070 (up to 5kA when used with a DTS sub-meter) Other (please specify)
SET 2- Current Inputs (333mV or Rogowski CTs) This must match the secondary / output signal from the CT you plan to connect to SET 2 of the DTS 307 MCM meter (Each meter required 1 to 3 CTs depending on the load type being measured - See CT section below)
--- SELECT ONE --- No CT (Set 2) 333mV CT (Set 2) Rogowski Flexible CT (Set 2)
SET 2: Current Inputs (333mV or Rogowski CTs) This must match the secondary / output signal from the CT you plan to connect to SET 2 of the DTS 307 MCM meter (Each meter required 1 to 3 CTs depending on the load type being measured - See CT section below)
--- SELECT ONE --- No CT (Set 2) 333mV CT (Set 2) Rogowski Flexible CT (Set 2)
SET 2; Current Inputs (333mV or Rogowski CTs) This must match the secondary / output signal from the CT you plan to connect to SET 2 of the DTS 307 MCM meter (Each meter required 1 to 3 CTs depending on the load type being measured - See CT section below)
--- SELECT ONE --- No CT (Set 2) 333mV CT (Set 2) Rogowski Flexible CT (Set 2)
SET 2: Do you want to add more 333mV or Rogowski CT sets Choose YES to add further CTs and NO if this is the last set of CTs for the DTS 307 MCM
--- SELECT ONE --- YES NO
SET 2: Amperage of CT - 333mV output Other CT ratings available on request
--- SELECT ONE --- 25 50 100 200 400 600 800 1000 For Currents > 1000A select Rogowski CTs
SET 2: Aperture of 25A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.45" x 0.47" (Suggested) - MLG-WCT-0470-025:333 0.72" x 0.62" - MLG-WCT-0620-025:333
SET 2: Aperture of 50A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.45" x 0.47" (Suggested) - MLG-WCT-0470-050:333 0.72" x 0.62" - MLG-WCT-0620-050:333
SET 2: Aperture of 100A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.72" x 0.62" (Suggested) - MLG-WCT-0620-100:333 0.75" x 0.93" - MLG-WCT-0960-100:333 1.0" x 1.4" - MLG-WCT-1400-100:333 1.3" x 1.7" - MLG-WCT-1700-100:333
SET 2: Aperture of 200A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.75" x 0.93" (Suggested) - MLG-WCT-0960-200:333 1.0" x 1.4" - MLG-WCT-1400-200:333 1.3" x 1.7" - MLG-WCT-1700-200:333 1.63" x 2.5" - MLG-WCT-2500-200:333
SET 2: Aperture of 400A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
1.3" x 1.7" (Suggested) - MLG-WCT-1700-400:333 1.63" x 2.5" - MLG-WCT-2500-400:333 2.0" x 3.5" - MLG-WCT-3500-400:333
SET 2: Aperture of 600A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
1.63" x 2.5" (Suggested) - MLG-WCT-2500-600:333 2.0" x 3.5" - MLG-WCT-3500-600:333
SET 2: Aperture of 800A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
1.63" x 2.5" (Suggested) - MLG-WCT-2500-800:333 2.0" x 3.5" - MLG-WCT-3500-800:333
SET 2: Aperture of 1000A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
2.0" x 3.5" - MLG-WCT-3500-1000:333
SET 2: Diameter of Flexible Rogowski CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
--- SELECT ONE --- 4" : MLG-WRT-4:140 (up to 2.5kA when used with a DTS sub-meter) 6" : MLG-WRT-6:140 (up to 2.5kA when used with a DTS sub-meter) 8" : MLG-WRT-8:070 (up to 5kA when used with a DTS sub-meter) 12" : MLG-WRT-12:070 (up to 5kA when used with a DTS sub-meter) Other (please specify)
SET 3- Current Inputs (333mV or Rogowski CTs) This must match the secondary / output signal from the CT you plan to connect to SET 3 of the DTS 307 MCM meter (Each meter required 1 to 3 CTs depending on the load type being measured - See CT section below)
--- SELECT ONE --- No CT (Set 3) 333mV CT (Set 3) Rogowski Flexible CT (Set 3)
SET 3: Current Inputs (333mV or Rogowski CTs) This must match the secondary / output signal from the CT you plan to connect to SET 3 of the DTS 307 MCM meter (Each meter required 1 to 3 CTs depending on the load type being measured - See CT section below)
--- SELECT ONE --- No CT (Set 3) 333mV CT (Set 3) Rogowski Flexible CT (Set 3)
SET 3; Current Inputs (333mV or Rogowski CTs) This must match the secondary / output signal from the CT you plan to connect to SET 3 of the DTS 307 MCM meter (Each meter required 1 to 3 CTs depending on the load type being measured - See CT section below)
--- SELECT ONE --- No CT (Set 3) 333mV CT (Set 3) Rogowski Flexible CT (Set 3)
SET 3: Do you want to add more 333mV or Rogowski CT sets Choose YES to add further CTs and NO if this is the last set of CTs for the DTS 307 MCM
--- SELECT ONE --- YES NO
SET 3: Amperage of CT - 333mV output Other CT ratings available on request
--- SELECT ONE --- 25 50 100 200 400 600 800 1000 For Currents > 1000A select Rogowski CTs
SET 3: Aperture of 25A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.45" x 0.47" (Suggested) - MLG-WCT-0470-025:333 0.72" x 0.62" - MLG-WCT-0620-025:333
SET 3: Aperture of 50A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.45" x 0.47" (Suggested) - MLG-WCT-0470-050:333 0.72" x 0.62" - MLG-WCT-0620-050:333
SET 3: Aperture of 100A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.72" x 0.62" (Suggested) - MLG-WCT-0620-100:333 0.75" x 0.93" - MLG-WCT-0960-100:333 1.0" x 1.4" - MLG-WCT-1400-100:333 1.3" x 1.7" - MLG-WCT-1700-100:333
SET 3: Aperture of 200A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.75" x 0.93" (Suggested) - MLG-WCT-0960-200:333 1.0" x 1.4" - MLG-WCT-1400-200:333 1.3" x 1.7" - MLG-WCT-1700-200:333 1.63" x 2.5" - MLG-WCT-2500-200:333
SET 3: Aperture of 400A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
1.3" x 1.7" (Suggested) - MLG-WCT-1700-400:333 1.63" x 2.5" - MLG-WCT-2500-400:333 2.0" x 3.5" - MLG-WCT-3500-400:333
SET 3: Aperture of 600A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
1.63" x 2.5" (Suggested) - MLG-WCT-2500-600:333 2.0" x 3.5" - MLG-WCT-3500-600:333
SET 3: Aperture of 800A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
1.63" x 2.5" (Suggested) - MLG-WCT-2500-800:333 2.0" x 3.5" - MLG-WCT-3500-800:333
SET 3: Aperture of 1000A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
2.0" x 3.5" - MLG-WCT-3500-1000:333
SET 3: Diameter of Flexible Rogowski CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
--- SELECT ONE --- 4" : MLG-WRT-4:140 (up to 2.5kA when used with a DTS sub-meter) 6" : MLG-WRT-6:140 (up to 2.5kA when used with a DTS sub-meter) 8" : MLG-WRT-8:070 (up to 5kA when used with a DTS sub-meter) 12" : MLG-WRT-12:070 (up to 5kA when used with a DTS sub-meter) Other (please specify)
SET 4- Current Inputs (333mV or Rogowski CTs) This must match the secondary / output signal from the CT you plan to connect to SET 4 of the DTS 307 MCM meter (Each meter required 1 to 3 CTs depending on the load type being measured - See CT section below)
--- SELECT ONE --- No CT (Set 4) 333mV CT (Set 4) Rogowski Flexible CT (Set 4)
SET 4: Current Inputs (333mV or Rogowski CTs) This must match the secondary / output signal from the CT you plan to connect to SET 4 of the DTS 307 MCM meter (Each meter required 1 to 3 CTs depending on the load type being measured - See CT section below)
--- SELECT ONE --- No CT (Set 4) 333mV CT (Set 4) Rogowski Flexible CT (Set 4)
SET 4; Current Inputs (333mV or Rogowski CTs) This must match the secondary / output signal from the CT you plan to connect to SET 4 of the DTS 307 MCM meter (Each meter required 1 to 3 CTs depending on the load type being measured - See CT section below)
--- SELECT ONE --- No CT (Set 4) 333mV CT (Set 4) Rogowski Flexible CT (Set 4)
SET 4: Do you want to add more 333mV or Rogowski CT sets Choose YES to add further CTs and NO if this is the last set of CTs for the DTS 307 MCM
--- SELECT ONE --- YES NO
SET 4: Amperage of CT - 333mV output Other CT ratings available on request
--- SELECT ONE --- 25 50 100 200 400 600 800 1000 For Currents > 1000A select Rogowski CTs
SET 4: Aperture of 25A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.45" x 0.47" (Suggested) - MLG-WCT-0470-025:333 0.72" x 0.62" - MLG-WCT-0620-025:333
SET 4: Aperture of 50A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.45" x 0.47" (Suggested) - MLG-WCT-0470-050:333 0.72" x 0.62" - MLG-WCT-0620-050:333
SET 4: Aperture of 100A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.72" x 0.62" (Suggested) - MLG-WCT-0620-100:333 0.75" x 0.93" - MLG-WCT-0960-100:333 1.0" x 1.4" - MLG-WCT-1400-100:333 1.3" x 1.7" - MLG-WCT-1700-100:333
SET 4: Aperture of 200A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.75" x 0.93" (Suggested) - MLG-WCT-0960-200:333 1.0" x 1.4" - MLG-WCT-1400-200:333 1.3" x 1.7" - MLG-WCT-1700-200:333 1.63" x 2.5" - MLG-WCT-2500-200:333
SET 4: Aperture of 400A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
1.3" x 1.7" (Suggested) - MLG-WCT-1700-400:333 1.63" x 2.5" - MLG-WCT-2500-400:333 2.0" x 3.5" - MLG-WCT-3500-400:333
SET 4: Aperture of 600A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
1.63" x 2.5" (Suggested) - MLG-WCT-2500-600:333 2.0" x 3.5" - MLG-WCT-3500-600:333
SET 4: Aperture of 800A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
1.63" x 2.5" (Suggested) - MLG-WCT-2500-800:333 2.0" x 3.5" - MLG-WCT-3500-800:333
SET 4: Aperture of 1000A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
2.0" x 3.5" - MLG-WCT-3500-1000:333
SET 4: Diameter of Flexible Rogowski CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
--- SELECT ONE --- 4" : MLG-WRT-4:140 (up to 2.5kA when used with a DTS sub-meter) 6" : MLG-WRT-6:140 (up to 2.5kA when used with a DTS sub-meter) 8" : MLG-WRT-8:070 (up to 5kA when used with a DTS sub-meter) 12" : MLG-WRT-12:070 (up to 5kA when used with a DTS sub-meter) Other (please specify)
SET 5- Current Inputs (333mV or Rogowski CTs) This must match the secondary / output signal from the CT you plan to connect to SET 5 of the DTS 307 MCM meter (Each meter required 1 to 3 CTs depending on the load type being measured - See CT section below)
--- SELECT ONE --- No CT (Set 5) 333mV CT (Set 5) Rogowski Flexible CT (Set 5)
SET 5: Current Inputs (333mV or Rogowski CTs) This must match the secondary / output signal from the CT you plan to connect to SET 5 of the DTS 307 MCM meter (Each meter required 1 to 3 CTs depending on the load type being measured - See CT section below)
--- SELECT ONE --- No CT (Set 5) 333mV CT (Set 5) Rogowski Flexible CT (Set 5)
SET 5; Current Inputs (333mV or Rogowski CTs) This must match the secondary / output signal from the CT you plan to connect to SET 5 of the DTS 307 MCM meter (Each meter required 1 to 3 CTs depending on the load type being measured - See CT section below)
--- SELECT ONE --- No CT (Set 5) 333mV CT (Set 5) Rogowski Flexible CT (Set 5)
SET 5: Do you want to add more 333mV or Rogowski CT sets Choose YES to add further CTs and NO if this is the last set of CTs for the DTS 307 MCM
--- SELECT ONE --- YES NO
SET 5: Amperage of CT - 333mV output Other CT ratings available on request
--- SELECT ONE --- 25 50 100 200 400 600 800 1000 For Currents > 1000A select Rogowski CTs
SET 5: Aperture of 25A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.45" x 0.47" (Suggested) - MLG-WCT-0470-025:333 0.72" x 0.62" - MLG-WCT-0620-025:333
SET 5: Aperture of 50A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.45" x 0.47" (Suggested) - MLG-WCT-0470-050:333 0.72" x 0.62" - MLG-WCT-0620-050:333
SET 5: Aperture of 100A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.72" x 0.62" (Suggested) - MLG-WCT-0620-100:333 0.75" x 0.93" - MLG-WCT-0960-100:333 1.0" x 1.4" - MLG-WCT-1400-100:333 1.3" x 1.7" - MLG-WCT-1700-100:333
SET 5: Aperture of 200A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.75" x 0.93" (Suggested) - MLG-WCT-0960-200:333 1.0" x 1.4" - MLG-WCT-1400-200:333 1.3" x 1.7" - MLG-WCT-1700-200:333 1.63" x 2.5" - MLG-WCT-2500-200:333
SET 5: Aperture of 400A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
1.3" x 1.7" (Suggested) - MLG-WCT-1700-400:333 1.63" x 2.5" - MLG-WCT-2500-400:333 2.0" x 3.5" - MLG-WCT-3500-400:333
SET 5: Aperture of 600A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
1.63" x 2.5" (Suggested) - MLG-WCT-2500-600:333 2.0" x 3.5" - MLG-WCT-3500-600:333
SET 5: Aperture of 800A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
1.63" x 2.5" (Suggested) - MLG-WCT-2500-800:333 2.0" x 3.5" - MLG-WCT-3500-800:333
SET 5: Aperture of 1000A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
2.0" x 3.5" - MLG-WCT-3500-1000:333
SET 5: Diameter of Flexible Rogowski CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
--- SELECT ONE --- 4" : MLG-WRT-4:140 (up to 2.5kA when used with a DTS sub-meter) 6" : MLG-WRT-6:140 (up to 2.5kA when used with a DTS sub-meter) 8" : MLG-WRT-8:070 (up to 5kA when used with a DTS sub-meter) 12" : MLG-WRT-12:070 (up to 5kA when used with a DTS sub-meter) Other (please specify)
SET 6- Current Inputs (333mV or Rogowski CTs) This must match the secondary / output signal from the CT you plan to connect to SET 6 of the DTS 307 MCM meter (Each meter required 1 to 3 CTs depending on the load type being measured - See CT section below)
--- SELECT ONE --- No CT (Set 6) 333mV CT (Set 6) Rogowski Flexible CT (Set 6)
SET 6: Current Inputs (333mV or Rogowski CTs) This must match the secondary / output signal from the CT you plan to connect to SET 6 of the DTS 307 MCM meter (Each meter required 1 to 3 CTs depending on the load type being measured - See CT section below)
--- SELECT ONE --- No CT (Set 6) 333mV CT (Set 6) Rogowski Flexible CT (Set 6)
SET 6; Current Inputs (333mV or Rogowski CTs) This must match the secondary / output signal from the CT you plan to connect to SET 6 of the DTS 307 MCM meter (Each meter required 1 to 3 CTs depending on the load type being measured - See CT section below)
--- SELECT ONE --- No CT (Set 6) 333mV CT (Set 6) Rogowski Flexible CT (Set 6)
SET 6: Do you want to add more 333mV or Rogowski CT sets Choose YES to add further CTs and NO if this is the last set of CTs for the DTS 307 MCM
--- SELECT ONE --- YES NO
SET 6: Amperage of CT - 333mV output Other CT ratings available on request
--- SELECT ONE --- 25 50 100 200 400 600 800 1000 For Currents > 1000A select Rogowski CTs
SET 6: Aperture of 25A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.45" x 0.47" (Suggested) - MLG-WCT-0470-025:333 0.72" x 0.62" - MLG-WCT-0620-025:333
SET 6: Aperture of 50A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.45" x 0.47" (Suggested) - MLG-WCT-0470-050:333 0.72" x 0.62" - MLG-WCT-0620-050:333
SET 6: Aperture of 100A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.72" x 0.62" (Suggested) - MLG-WCT-0620-100:333 0.75" x 0.93" - MLG-WCT-0960-100:333 1.0" x 1.4" - MLG-WCT-1400-100:333 1.3" x 1.7" - MLG-WCT-1700-100:333
SET 6: Aperture of 200A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.75" x 0.93" (Suggested) - MLG-WCT-0960-200:333 1.0" x 1.4" - MLG-WCT-1400-200:333 1.3" x 1.7" - MLG-WCT-1700-200:333 1.63" x 2.5" - MLG-WCT-2500-200:333
SET 6: Aperture of 400A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
1.3" x 1.7" (Suggested) - MLG-WCT-1700-400:333 1.63" x 2.5" - MLG-WCT-2500-400:333 2.0" x 3.5" - MLG-WCT-3500-400:333
SET 6: Aperture of 600A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
1.63" x 2.5" (Suggested) - MLG-WCT-2500-600:333 2.0" x 3.5" - MLG-WCT-3500-600:333
SET 6: Aperture of 800A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
1.63" x 2.5" (Suggested) - MLG-WCT-2500-800:333 2.0" x 3.5" - MLG-WCT-3500-800:333
SET 6: Aperture of 1000A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
2.0" x 3.5" - MLG-WCT-3500-1000:333
SET 6: Diameter of Flexible Rogowski CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
--- SELECT ONE --- 4" : MLG-WRT-4:140 (up to 2.5kA when used with a DTS sub-meter) 6" : MLG-WRT-6:140 (up to 2.5kA when used with a DTS sub-meter) 8" : MLG-WRT-8:070 (up to 5kA when used with a DTS sub-meter) 12" : MLG-WRT-12:070 (up to 5kA when used with a DTS sub-meter) Other (please specify)
SET 7- Current Inputs (333mV or Rogowski CTs) This must match the secondary / output signal from the CT you plan to connect to SET 7 of the DTS 307 MCM meter (Each meter required 1 to 3 CTs depending on the load type being measured - See CT section below)
--- SELECT ONE --- No CT (Set 7) 333mV CT (Set 7) Rogowski Flexible CT (Set 7)
SET 7: Current Inputs (333mV or Rogowski CTs) This must match the secondary / output signal from the CT you plan to connect to SET 7 of the DTS 307 MCM meter (Each meter required 1 to 3 CTs depending on the load type being measured - See CT section below)
--- SELECT ONE --- No CT (Set 7) 333mV CT (Set 7) Rogowski Flexible CT (Set 7)
SET 7; Current Inputs (333mV or Rogowski CTs) This must match the secondary / output signal from the CT you plan to connect to SET 7 of the DTS 307 MCM meter (Each meter required 1 to 3 CTs depending on the load type being measured - See CT section below)
--- SELECT ONE --- No CT (Set 7) 333mV CT (Set 7) Rogowski Flexible CT (Set 7)
SET 7: Do you want to add more 333mV or Rogowski CT sets Choose YES to add further CTs and NO if this is the last set of CTs for the DTS 307 MCM
--- SELECT ONE --- YES NO
SET 7: Amperage of CT - 333mV output Other CT ratings available on request
--- SELECT ONE --- 25 50 100 200 400 600 800 1000 For Currents > 1000A select Rogowski CTs
SET 7: Aperture of 25A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.45" x 0.47" (Suggested) - MLG-WCT-0470-025:333 0.72" x 0.62" - MLG-WCT-0620-025:333
SET 7: Aperture of 50A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.45" x 0.47" (Suggested) - MLG-WCT-0470-050:333 0.72" x 0.62" - MLG-WCT-0620-050:333
SET 7: Aperture of 100A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.72" x 0.62" (Suggested) - MLG-WCT-0620-100:333 0.75" x 0.93" - MLG-WCT-0960-100:333 1.0" x 1.4" - MLG-WCT-1400-100:333 1.3" x 1.7" - MLG-WCT-1700-100:333
SET 7: Aperture of 200A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.75" x 0.93" (Suggested) - MLG-WCT-0960-200:333 1.0" x 1.4" - MLG-WCT-1400-200:333 1.3" x 1.7" - MLG-WCT-1700-200:333 1.63" x 2.5" - MLG-WCT-2500-200:333
SET 7: Aperture of 400A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
1.3" x 1.7" (Suggested) - MLG-WCT-1700-400:333 1.63" x 2.5" - MLG-WCT-2500-400:333 2.0" x 3.5" - MLG-WCT-3500-400:333
SET 7: Aperture of 600A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
1.63" x 2.5" (Suggested) - MLG-WCT-2500-600:333 2.0" x 3.5" - MLG-WCT-3500-600:333
SET 7: Aperture of 800A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
1.63" x 2.5" (Suggested) - MLG-WCT-2500-800:333 2.0" x 3.5" - MLG-WCT-3500-800:333
SET 7: Aperture of 1000A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
2.0" x 3.5" - MLG-WCT-3500-1000:333
SET 7: Diameter of Flexible Rogowski CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
--- SELECT ONE --- 4" : MLG-WRT-4:140 (up to 2.5kA when used with a DTS sub-meter) 6" : MLG-WRT-6:140 (up to 2.5kA when used with a DTS sub-meter) 8" : MLG-WRT-8:070 (up to 5kA when used with a DTS sub-meter) 12" : MLG-WRT-12:070 (up to 5kA when used with a DTS sub-meter) Other (please specify)
SET 8- Current Inputs (333mV or Rogowski CTs) This must match the secondary / output signal from the CT you plan to connect to SET 8 of the DTS 307 MCM meter (Each meter required 1 to 3 CTs depending on the load type being measured - See CT section below)
--- SELECT ONE --- No CT (Set 8) 333mV CT (Set 8) Rogowski Flexible CT (Set 8)
SET 8: Current Inputs (333mV or Rogowski CTs) This must match the secondary / output signal from the CT you plan to connect to SET 8 of the DTS 307 MCM meter (Each meter required 1 to 3 CTs depending on the load type being measured - See CT section below)
--- SELECT ONE --- No CT (Set 8) 333mV CT (Set 8) Rogowski Flexible CT (Set 8)
SET 8; Current Inputs (333mV or Rogowski CTs) This must match the secondary / output signal from the CT you plan to connect to SET 8 of the DTS 307 MCM meter (Each meter required 1 to 3 CTs depending on the load type being measured - See CT section below)
--- SELECT ONE --- No CT (Set 8) 333mV CT (Set 8) Rogowski Flexible CT (Set 8)
SET 8: Do you want to add more 333mV or Rogowski CT sets Choose YES to add further CTs and NO if this is the last set of CTs for the DTS 307 MCM
--- SELECT ONE --- YES NO
SET 8: Amperage of CT - 333mV output Other CT ratings available on request
--- SELECT ONE --- 25 50 100 200 400 600 800 1000 For Currents > 1000A select Rogowski CTs
SET 8: Aperture of 25A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.45" x 0.47" (Suggested) - MLG-WCT-0470-025:333 0.72" x 0.62" - MLG-WCT-0620-025:333
SET 8: Aperture of 50A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.45" x 0.47" (Suggested) - MLG-WCT-0470-050:333 0.72" x 0.62" - MLG-WCT-0620-050:333
SET 8: Aperture of 100A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.72" x 0.62" (Suggested) - MLG-WCT-0620-100:333 0.75" x 0.93" - MLG-WCT-0960-100:333 1.0" x 1.4" - MLG-WCT-1400-100:333 1.3" x 1.7" - MLG-WCT-1700-100:333
SET 8: Aperture of 200A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
0.75" x 0.93" (Suggested) - MLG-WCT-0960-200:333 1.0" x 1.4" - MLG-WCT-1400-200:333 1.3" x 1.7" - MLG-WCT-1700-200:333 1.63" x 2.5" - MLG-WCT-2500-200:333
SET 8: Aperture of 400A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
1.3" x 1.7" (Suggested) - MLG-WCT-1700-400:333 1.63" x 2.5" - MLG-WCT-2500-400:333 2.0" x 3.5" - MLG-WCT-3500-400:333
SET 8: Aperture of 600A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
1.63" x 2.5" (Suggested) - MLG-WCT-2500-600:333 2.0" x 3.5" - MLG-WCT-3500-600:333
SET 8: Aperture of 800A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
1.63" x 2.5" (Suggested) - MLG-WCT-2500-800:333 2.0" x 3.5" - MLG-WCT-3500-800:333
SET 8: Aperture of 1000A : 333mV CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
2.0" x 3.5" - MLG-WCT-3500-1000:333
SET 8: Diameter of Flexible Rogowski CT Note: Confirm that aperture is large enough to accommodate the wire diameter you plan to measure.
--- SELECT ONE --- 4" : MLG-WRT-4:140 (up to 2.5kA when used with a DTS sub-meter) 6" : MLG-WRT-6:140 (up to 2.5kA when used with a DTS sub-meter) 8" : MLG-WRT-8:070 (up to 5kA when used with a DTS sub-meter) 12" : MLG-WRT-12:070 (up to 5kA when used with a DTS sub-meter) Other (please specify)