DTS 305

$0.00

DIN rail Mount / Submeter & Transducer

ETL Listed, CE, BTL Listed, SunSpec certified
208V – 480V ac, L-L (1P 2W, 1P 3W, 3P 4W)
690V ac, L-L, 3 or 4 W (option)
Ethernet or RS-485 connectivity
Modbus TCP, BACnet/IP, SNMP or DNP 3.0
Modbus RTU, BACnet MS/TP or LonWorks
333mV, 5A or Rope CT inputs
Bi-directional for renewable systems (NET metering)
Options: DTS Display, Digital Inputs, Digital or Analog Outputs, Auxiliary
The specifications above are model dependent.

* Required field

Current Inputs*
Voltage*
Connectivity*
Communications*
Communications*
Auxiliary*
Auxiliary*
Digital & Analog I/O (4-20 mA)
(import gas/water meters, control other devices)
DTS Display
Amperage of CT
Amperage of CT
Amperage of CT
Aperture of CT
Aperture of CT
Aperture of CT
Aperture of CT
Aperture of CT
Aperture of CT
Aperture of CT
Aperture of CT
Aperture of CT
Aperture of CT
Aperture of CT
Aperture of CT
Aperture of CT
Aperture of CT
Aperture of CT
Aperture of CT
Diameter of CT
Aperture of CT
Aperture of CT
Aperture of CT
Aperture of CT
Aperture of CT
Aperture of CT
Diameter of CT
Diameter of CT
In-line Fuse Kit
(recommended with every meter)
DTS 305
Total
$0.00
Email
This field is for validation purposes and should be left unchanged.

Categories: AC Submeters, Electric Submeters

Data Sheets & Downloads

Brochures

DTS-305-Sheet_18R1 (1.9 Mb) [PDF]
Inline Fuse Kit Sheet (1 Mb) [PDF]

Technical

DTS 305 – Quick Start Guide (2.3 Mb) [PDF]
RS-485 Cabling Requirements for Modbus RTU and BACnet MSTP_R19B (412.4 Kb) [PDF]

Software

Download DTS Config (1.8 Mb) [ZIP]
Download DTS Toolbox (9.2 Mb) [ZIP]

View Software / Drivers page for more details & current version info.

DTS Modbus Map (464.4 Kb) [PDF]
DTS Modbus Addendum (SunSpec) (215.4 Kb) [PDF]
DTS BACnet MS/TP Map (369 Kb) [PDF]
DTS BACnet/IP Map (182.2 Kb) [PDF]
DTS LonWorks Map (150 Kb) [PDF]
DTS SNMP Map (146.1 Kb) [PDF]
DTS DNP 3.0 Map (157.1 Kb) [PDF]

DTS Logging System (308 Kb) [PDF]
Configuring digital outputs (700.4 Kb) [PDF]

Product Description

The DTS 305 digital 3 phase power meter and power transducer provides you with unprecedented functionality, flexibility and performance in electrical measurement and control. This powerful meter is an extremely compact, easy to configure, simple to install IED (Intelligent Electronic Device). With the DTS 305, you only pay for the power meter usage hardware, software and functionality which you require, making this one of the most cost-effective products of its kind available on the market today.

This meter provides the full spectrum of instantaneous and integrated electrical power measurements as well as flexible I/O options. These I/O options offer up to 6 onboard outputs, each of which may be independently ordered as either digital or analog as well as 4 digital I/O relay outputs or status inputs.

The DTS 305 is a 3 phase power monitoring device which may be used for 3 or 4 wire systems. This makes the DTS 305 ideal for a wide range of applications from monitoring of power networks, load management to check metering. All of the DTS 305‘s measurements are available via its on-board Ethernet port. These may be viewed using the DTS Display local indication module or the DTS Config software system. The DTS 305 may be operated in stand-alone mode or integrated into a higher order energy management or SCADA system using its second RS-485 port running either Modbus or DNP 3.00 communication protocols.

Features

Auxiliary powered single / three phase energy submeter with auto-topology detection
Bi-directional for renewable systems (NET metering)
Interfaces with 1A, 5A and “safe” mV and RopeCTs
Embedded Ethernet connectivity – Modbus/TCP, BACnet/IP, SNMP or DNP 3.0
RS-485 connectivity – Modbus RTU or BACnet MS/TP
LonWorks FT-10 communications
6 onboard outputs (digital or isolated analog) – optional
4 digital I/O (pulse outputs or status/counter inputs) – optional
Optional remote DTS Display
Pulse output standard
Color coded pluggable connectivity
DIN rail or surface mounting
User configurable using DTS Config software
User-definable Modbus register area
Compatible with energy management and control software suites
Integrates seamlessly with AcquiSuite data acquisition server
ETL & BTL listed
SunSpec Alliance certified
Designed and Manufactured in the USA. Complies with the Buy American Provisions of ARRA Section 1605

** CTs excluded

Specifications

Measuring Circuits	Voltage range: 208-480V ac, L-L, 3 or 4 w (690V option) Rated voltage: 280 V ac L-N / 485 V ac L-L Voltage overload: 1.2 x (1.05 x – 690V option) Voltage burden: <0.1 VA @ 280 V ac L-N Frequency: 45 to 65 Hz Rated current: 1A to 5A isolated 333 mV for mV CT version Current overload: 1.5 x for 1A or 5A versions 1.2 x for mV versions Current input burden: 0.5 VA @ 5 A Power overload: 1.2 x
Accuracy	Voltage: 0.5%, <0.2% typical (80-120%) Current: 0.5%, <0.2% typical (10-120%) Power: 0.5%, <0.2% typical (10-120%) Power Factor: 0.5% (between 0.5 and 1.0) Energy:** Class 0.5 (ANSI C12.20)
Power Supply	Voltage: 100-240 or 100-277 Vac/dc, 12 or 24 or 48 Vdc Tolerance : -10%, +10%Frequency: 50/60 Hz for AC supply models only Burden: 5VA Operating temp: -4º to 131ºF (-20º to 55ºC) Storage temp: -40º to 185ºF (-40º to 85ºC) Humidity: 5 to 95% R.H. non-condensing
Mechanical	Connection: Pluggable terminals Case Material: Self-extinguishable, V0 plastic Protection: IP40 Dimensions: 4”(102mm)H x 5.00”(127mm)D x 3.94”(100mm)W Weight: 1.25 lbs (0.57 kg)
Communications (Serial)	Connection: 3 way pluggable, screw terminal Protocols: Modbus RTU or BACnet MS/TP
Communications (LonWorks)	Connection: 2 way pluggable, screw terminal Protocols: LonWorks FT-10
Communications (Ethernet)	Connection: RJ45, 10/100Base-T Protocols: Modbus TCP or BACNet/IP or SNMP or DNP 3.0 over IP
Analog Output (Isolated, Bi-directional)	Output Type: 1mA or 7.5 / 10 / 20mA available 5 / 10Vdc Resolution: 16384 points (14 bit) Max impedance: 500 ohms for a 20mA range
Pulse / Status Outputs (Optional)	Type: Potential Free, N.O. Solid State Relay Pulse Width: 100 mS default Min 50 mS, User configurable up to 10 Seconds Max 10 Pulses per Second Pulse Rate: 1 Pulse / 1 kWh default, User configurable Max On-Resistance: 30 ohm Max Switching Voltage: 240Vac Max Switching Current: 120mA (350mA for 10mS) Connection: 4x Pin-Pairs (Outputs A – D)
Counter / Status Inputs (Optional)	Type: Dry Contact Min Pulse Width: 50mS, Max 10 Pulses per Second Max Current/Voltage: 15mA / 18V Connection: 4x Pin-Pairs (Inputs A – D)
Standards & Safety	ETL listing: 4001073 Conforms to: UL Std 61010.1 Certified to: CSA Std C22.2 # 61010.1 EMC: IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11 FCC: CISPR 11 class A Other: IEC60688 Category III – 280Vac / 485Vac

Call 877-777-6567